3 Disconnect the C-link cable connecting the mailbox to the stapler. See figure 6-179. Figure 6-179 C-link Cable on Mailbox with Stapler 4 Remove the Left Output Bin (figure 1-3 on page 14). Lift the bin gently to remove it. 5 Lift up on the outer edge of the stapler to clear the retaining notches, and pull the stapler forward out of the frame (figure 6-178). To Reinstall: 1 Slide the stapler into the 4th slot from the top, and lower it into its retaining notches (figure 6-178). 2 Replace the Left Output Bin. 3 Connect the C-link cable from the mailbox to the stapler. Turn the printer on. 364 Chapter 6 Removal and Replacement C4085-91087