Hinges Figure 6-187 Hinges 1 Remove the Stapler Assembly (see figure 6-178 on page 363). 2 Remove the Top Cover Assembly (see figure 6-185 on page 370). 3 Remove the Stapler Bed Assembly (see figure 6-186 on page 371). 4 Release the brushes bar from the retaining notches, and lift upwards. 5 Remove 2 screws joining each hinge to the housing (see figure 6-187, callout 1). 6 Disconnect the 2 cables in the hinge containing cables from the Stapler Controller PCA (see figure 6-183 on page 368, callout 2). C4085-91087 Stapler Assembly Removal and Replacement 373