Hard disk drive (HDD) / solid state drive (SSD) 7.4.3 Configuration with up to 10 HDD/SSD modules I SAS HDDs must not be populated above or below BC-SAS / BC-SATA HDDs. In order to avoid this configuration, please make a free bay intentionally. For example, if only one SAS HDD or one BC-SAS / BC-SATA HDD is ordered, this HDD will be installed in position 0 and position 1 will not be used. SAS HDDs and BC-SAS / BC-SATA HDDs can be mixed as long as SAS HDDs are not populated above or below BC-SAS / BC-SATA HDDs. The same kind of HDDs can be populated above or below each other. Configuration with up to 10 HDD/SSD modules Figure 68:
Configuration with up to 10 HDDs/SSDs RX2530 M4 Upgrade and Maintenance Manual 151 Position Logical drive number ServerView RAID Manager display name [0] 0 Vendor Product (0) [1] 1 Vendor Product (1) [2] 2 Vendor Product (2) [3] 3 Vendor Product (3) [4] 4 Vendor Product (4) [5] 5 Vendor Product (5) [6] 6 Vendor Product (6) [7] 7 Vendor Product (7) [8] 8 Vendor Product (8) [9] 9 Vendor Product (9)