Hard disk drive (HDD) / solid state drive (SSD) Figure 74: Removing the dummy module К Press both tabs together (1) and pull the dummy module out of its bay (2). V CAUTION! Keep the dummy module for future use. Always replace dummy modules into unused HDD/SSD bays to comply with applicable EMC regulations and satisfy cooling requirements. 7.4.4.3 Installing a 2.5-inch HDD/SSD module Figure 75: Opening the 2.5-inch HDD/SSD module locking lever К Pinch the green locking clip (1) and open the locking lever (2). RX2530 M4 Upgrade and Maintenance Manual 157