Before you start Please see the following ServerView Suite topics: Operation Virtualization Maintenance Out-Of-Band Management I For the latest information on hardware options, see the hardware configurator of your server, available online at the following address: http://ts.fujitsu.com/products/standard_servers/index.htm For Japan: http://www.fujitsu.com/jp/products/computing/servers/primergy/ Please contact your local Fujitsu customer service partner for details on how to order expansion kits or spare parts. Use the Fujitsu Illustrated Spares Catalog to identify the required spare part and obtain technical data and order information.
Illustrated Spares catalogs are available online at http://manuals.ts.fujitsu.com/illustrated_spares (not valid for Japan). Replacing a defective component The Global Error indicator on the front of the server reports defective hardware components that need to be replaced. For more information on the controls and indicators of your server, see the operating manual of your server and section "Connectors and indicators" on page 415 . If the system has been powered off in order to replace a non-hot plug unit, a system of PRIMERGY diagnostic indicators guides you to the defective component.
The "Indicate CSS" button enables the indicator next to the defective component even if the server has been switched off and disconnected from the mains. For more information, see section "Using diagnostic information" on page 47 and section "Indicators on the front panel" on page 422 . If the defective component is a customer replaceable unit included in the CSS concept (Customer Self Service), the CSS indicator on the server front will light up. It is recommended to prepare local maintenance tasks using remote diagnostics procedures, see the "ServerView Suite Local Service Concept (LSC)" manual. 26 Upgrade and Maintenance Manual RX2530 M4