fujitsu RX2530 M4 — FUJITSU Server PRIMERGY RX2530 M4

Important information If the server is brought in from a cold environment, condensation may form both inside and on the outside of the server. Wait until the server has acclimatized to room temperature and is absolutely dry before starting it up. Material damage may be caused to the server if this requirement is not observed. Only transport the server in its original packaging or in packaging that protects it from impacts and jolts. In Japan and APAC, transporting the server in its original packaging does not apply. Installation and operation This server should not be operated in ambient temperatures above 35 °C.

For servers with Advanced Thermal Design the ambient temperature can increase to 40 °C or 45 °C. If the server is integrated into an installation that draws power from an industrial power supply network with an IEC309 connector, the power supply's fuse protection must comply with the requirements for non- industrial power supply networks for type A connectors. The server automatically adjusts itself to a mains voltage, see the type label of your server. Ensure that the local mains voltage lies within these limits. This server must only be connected to properly grounded power outlets or connected to the grounded rack internal power distribution server with tested and approved power cords.

Ensure that the server is connected to a properly grounded power outlet close to the server. Ensure that the power sockets on the server and the properly grounded power outlets are easily accessible. The On/Off button or the main power switch (if present) does not isolate the server from the mains power supply. In case of repair or servicing disconnect the server completely from the mains power supply, unplug all power plugs from the properly grounded power outlets. Always connect the server and the attached peripheral devices to the same power circuit. Otherwise you run the risk of losing data if, for example, the server is still running but a peripheral device (e.g.

memory subsystem) fails during a power outage. 36 Upgrade and Maintenance Manual RX2530 M4