beckhoff TF5200 — 2.1 Configuring axes and channels

Description Channel 1 name = X nr = 1 Channel 2 name = X nr = 11 Channel 2 Channel 1 Axis nr = 11 clone of = 1 link to = 1 path Axis nr = 1 Original program Jog of 1 11 Logical axis of channel Physical axis (drive interface) 1 Fig. 2: Configuring axes Cloned axis To create a cloned axis, the axis must first already exist and be initialised before its axis parameter list can be used as a template for the cloned axis. A cloning process involves taking over the parameters of the axis which acts as a template only once. Any subsequent change in axis parameters has no effect on the cloned data set. It only modifies or overwrites the individual axis parameters.

Spindle programming in the jog-of-path channel Spindle axes cannot be created as cloned axes. However, as of CNC Build V3.3081.5 or V3.1.3112.0, use of the functions G33, G331 and #CAX is permitted in the jog-of-path channel but this requires a spindle. A default main spindle must therefore be created in the jog-of-path channel. This permits the use of exactly one spindle in conjunction with the functions mentioned above without an additional channel license. Jog of path 12 Version: 1.17 TF5200 | TwinCAT 3 CNC Position controller