Downloaded from https://www.everyspec.com AMC.Pl706.210 detent will -release the rotor at, a spin, of 2560 rpmn which is in the specified range. There is one feature that has been neglected:I the torque of the ball rotor bquenzes the detents - laterally. This will- put a 'friction force on the -(letents, which will hinler their tendency to move -outward. Therefore, the spin- -must be I geater than the value calculated to cause arm- ing, or the length of the detents can'be less. In -the actual' fuze, the detent is- only 0.208 in. long which according to -LEcI- 10-16 wouldi' re- lease the rotor at 2370 rpmn. 'Ad-3.
ROTARY SHUTTERS Since the bursting charges of -high explosive i projectiles are -relatively insensitive to shock, a comparatively powerful detonation is necessary to initiate themi. This is provided by a booster. N For exam pie, Booster M121A4 is used in certain fixed, seni~fixed, and separate loading projdc- a' tiles. Fig. 10-6-shows this-booster with, two iria- joi parts: (1)- the booster cup whiceh. contains a -tetryL chaige,.-and (2) -a brass -body- containing- a N etyl lead and a detonator-rotor ass enbly. The ______ ______ latter ,provides~an out-of-line feature -within the A-BODY J ROTOR LOCK IN LOCK booster in order to make it safe, if handled'aldne.
D0-COVER K-CFNTRIFUGAL'PIN The rotary shutter- is used- to pivot the deto- E -01ION SKIN PAPER L- OT0R IVOT PIN - F F-ROTOR STOP PIN M-LEAD nator into alignment with the other- ekolosive G-CTONATOR N-BOOSTEft CUP" eleent i fue ad oose.Th- center of' - H-ROTOR 0-BOOSTER CHARGE elements~ ~ ~ ~ ~ infz n otr h -ROTOR LOCMPM P - CENTR!FUGAL- PIN'LOCK PIN gravity of the rotor is not on- the- center line-of the rotor pivot and not on, the aspifi -axis. The F4r 06 oseM14 -centrifugal force that is ddVelobed wvill there-Fire0-.BseM2A for roatethei~tr. etets re~s~do lck. Bodster,,M21A4. Basically, -the..shutte6r-is-a~disk.
the, rot6rlri both unarmed and' armed'positio; wt tolresemnsrmoe.Tftsacru The shutter action is described in- par. 6-5.5' a aiy h emnsaectott raea - - -~~afid-illustratedin-Fig. 6-'20.'The torque caused by -a osittems etrt on -------- pi~jej~ ppi'clultd ih q 65 -n unbalance soastshf h6msceeroapin a tih6-reg 16~ V f§tIn is-aclted ith -6,i diametricallyopposite to the detonator. This-will insure that the detonator can move -ow~ard the spin ax is. Since these rotors can be sliced from an G t r r sino (10.1) extruded bar or-made by a sintered metal, Itech- niqu e, it is- not diff,,ult 'to produce -this-shape.
where m is the mass of the shutter, slug; a) is-,the Wifh~the limited space allotted to the rotor, r, angular velocity, rad/sec; A-is an- aingle, rad; and, ;And rwillI be small (on the orde rof 0.1 in.). Eq., r-,and r~ are radii, in., all defined in Fig.,-6-20.
In' 6-56 indicates-the torque required to -accelerate -order for the shutter--to turn, G, must be greater the ,rotor; -Suppose the -frictional torque effec- than the frictional- torque G / (after the locking -tively -acts at the center qf gravity; it will be detents are'removed) WVhen the langle -becomes, zero, the driving G =1'arl-t(08) torque ceases; therefore, -the detonator rnuit = P'Y'r 1 bf 1-8 move into alignment before 4 becomes zero. Fig. - 6-20 shows the actual rotar r shutter-of in which a' is setback or creep acceleration, and 10-7