Adding a vehicle profile You can add a vehicle profile for each vehicle to be used with your device. 1 Select the vehicle profile icon from the status bar and select . 2 Select an option: To add a motorcycle, select Motorcycle . To add an ATV, select ATV . To add a side-by-side, select Side-by-Side . To add a full size vehicle, select Full Size . To add a snowmobile, select Snowmobile . 3 Follow the on-screen instructions to enter the vehicle characteristics. Choosing a Vehicle Profile Select the vehicle profile icon on the status bar.
Installation Mounting Your Device in an ATV or Side-by-Side Power Cable Overview WARNING See the Important safety and product information guide in the product box for product warnings and other important information. Garmin ® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury. Mounting Considerations The device must be mounted close to the bus bar or battery and within the range of the supplied power cable. The mounting location must allow for the routing and connection of all cables.
Excess wire should be bundled and secured using the included zip ties. The electrical contacts must be free from paint. 4 Installation Mount connector 10 to 30 Vdc system power (red) System ground (black)