Garmin — My device is not acquiring satellite signals

Device Care NOTICE Avoid dropping your device. Do not store the device where prolonged exposure to extreme temperatures can occur, as it can cause permanent damage. Never use a hard or sharp object to operate the touchscreen as this may result in damage. Cleaning the outer casing NOTICE Avoid chemical cleaners and solvents that can damage plastic components. 1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry. Cleaning the Touchscreen 1 Use a soft, clean, lint-free cloth. 2 If necessary, lightly dampen the cloth with water.

3 If using a dampened cloth, turn off the device and disconnect the device from the power. 4 Gently wipe the screen with the cloth. Avoiding theft Remove the device and mount from sight when not in use. Remove the residue left on the windscreen by the suction cup. Do not keep your unit in the glove compartment. Register your device using the Garmin Express software ( garmin.com/express ). Restarting the Device You can restart your device if it stops functioning. Hold the power key for 12 seconds. Removing the Device from the Mount 1 Press the release tab or button on the mount. 2 Tilt the top of the device downwards and lift the device from the mount.

Troubleshooting My device is not acquiring satellite signals Take your device out of multi-storey car parks and away from tall buildings and trees. Remain stationary for several minutes. 62 Troubleshooting