Appendix Mounting Your Tread in a Vehicle NOTICE Before mounting the device, check the local laws pertaining to windscreen mounting. WARNING Do not use the suction cup mount on a motorcycle. See the Important safety and product information guide in the product box for product warnings and other important information. NOTE: the suction cup mount and automotive power cable are not included with all device models. Go to garmin .com to purchase optional accessories. 1 Align the ball on the Group Ride mount with the double-socket arm . 2 Align the ball on the suction cup with the double-socket arm. 3 Tighten the knob slightly. 4 Remove the clear plastic from the suction cup.
5 Clean and dry your windscreen and the suction cup with a lint-free cloth. 6 Press the suction cup to the windshield and flip the lever back towards the windshield. 7 If necessary, rotate the Group Ride mount so that the antenna faces up, adjust the mount for better viewing and operation, and tighten the knob. 8 Fit the bottom of your device into the Group Ride mount. 9 Press the device into the Group Ride mount until it snaps into place. 10 Connect the Group Ride power cable to the connector on the automotive power cable . 11 Tighten the collar around the connected power cables. 12 Plug the other end of the automotive power cable into a power outlet in your vehicle. 64 Appendix