Garmin — Connecting the Device to Your Computer

Installing a memory card for maps and data You can install a memory card to increase the storage space for maps and other data on your device. You can purchase memory cards from an electronics supplier, or go to www.garmin.com/maps to purchase a memory card with pre-loaded Garmin mapping software. The device supports microSD memory cards from 4 to 256 GB. 1 Locate the map and data memory card slot on your device ( Device Overview , page 1 ). 2 Pull up the weather cap from the microSD card slot. 3 Slide the microSD card slot cover towards the edge of the device. 4 Pull the microSD card slot cover up. 5 Insert a microSD card into the slot. NOTE:

confirm that the microSD card fits flush against the card slot contacts. 6 Close the SD card cover. 7 Slide the SD card cover towards the centre of the device. Data management The device has a memory card slot for additional data storage. NOTE: the device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer. About memory cards You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software ( www.garmin.com ). Memory cards can be used to store files such as maps and custom POIs. Connecting the Device to Your Computer You can connect the device to your computer using a USB cable.

1 Plug the small end of the USB cable into the port on the device. 2 Plug the larger end of the USB cable into a port on your computer. 3 When your Tread device prompts you to enter file transfer mode, select Yes . A picture of your device connected to a computer appears on the device screen. Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume. 72 Appendix