Garmin — Setting a Simulated Location

Enabling Maps You can enable map products installed on your device. TIP: To purchase additional map products, go to http://buy.garmin.com . 1 Select Settings > Map & Vehicle > myMaps . 2 Select a map. Navigation Settings Select Settings > Navigation . Route Preview : Shows a preview of the major roads in your route when you start navigation. Calculation Mode : Sets the route calculation method. Avoidances : Sets road features to avoid on a route. Custom Avoidances : Allows you to avoid specific roads or areas. Toll Roads : Sets preferences for avoiding toll roads. Tolls and Fees : Sets preferences for avoiding toll roads and toll stickers. NOTE: This feature is not available in all areas.

Environmental Zones : Sets the avoidance preferences for areas with environmental or emissions restrictions that may apply to your vehicle. Restricted Mode : Disables all functions that require significant operator attention. GPS Simulator : Stops the device from receiving a GPS signal, and saves battery power. Calculation Mode Settings Select Settings > Navigation > Calculation Mode . The route calculation is based on road speeds and vehicle acceleration data for a given route. Faster Time : Calculates routes that are faster to drive but can be longer in distance. Shorter Distance : Calculates routes that are shorter in distance but can take more time to drive. Off Road :

Calculates a direct line from your location to your destination. Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS simulator to plan routes from a simulated location. 1 Select Settings > Navigation > GPS Simulator . 2 From the main menu, select View Map . 3 Tap the map twice to select an area. The address of the location appears at the bottom of the screen. 4 Select the location description. 5 Select Set Location . Garmin DriveSmart Settings 39