Paper-feed assembly 1 Remove the DIMMs, the back, right, and left covers, the internal paper guide, and the top cover (see pages 89 through 95). 2 Remove the printer door (see pages 96 through 99), the formatter pan (see page 137) and the ECU pan (see pages 139 and 140). 3 Disconnect the two cable connections (callout 1). 4 Partially unwind the cables from their cable guides. 5 Remove the two screws (callout 2) securing the assembly to the printer chassis. 2 2 1 2 Figure 67. Paper-feed assembly removal (1 of 3) 6 Lift the paper-feed frame away from the chassis, being careful not to damage sensor flags. To reinstall Be sure to seat the tab into the frame. EN Bottom assemblies 141