6 Lift the formatter pan up slightly, toward the right side of the product, and then rotate the formatter pan down so that it rests on the ESD mat. 7 Release the scanner cable cover (callout 1) by pushing it in the direction of the arrow, and then lift the cover away from the product. 8 Release the connector stay, and then pull the flat, flexible cable (callout 2) out of its connector on the formatter. Note The cable is “notched” so that it clears the speaker. Make sure the cable is reattached in the correct orientation when you reassemble the EN Document scanner assemblies 97 product. 12 2 Printer door removal (2 of 4) Figure 24.