3 Tutorial 4 — Using Measurement Tools in an Inspection Advanced Tool Tutorials Tutorial 4 — Using Measurement Tools in an Inspection FrontRunner Job: Start > Visionscape > Visionscape Tutorials & Samples > Tutorials > GigE Systems > Using Measurement Tools in an Inspection > tutorial_meastool.avp This tutorial guides you through solving an inspection problem using Visionscape measurement tools. The inspection checks that all good parts maintain the relative positions among the tips of the two prongs and the center of the circular shape, and maintain the radius of the circular portion of the part. 1. Start FrontRunner by selecting Start > Visionscape > Visionscape FrontRunner.
FrontRunner displays its main window. 2. Select a Visionscape Device on the FrontRunner Device toolbar. 3. Start creating a new Job by clicking . 4. To display the Job Tree and Step Tree, click This allows you to view your Job as you create it. Note: Maximize or minimize the Editor as needed to accomplish the steps in this procedure. 5. Highlight Acquire in the Step Tree (left pane). FrontRunner displays the Acquire properties page. Note: You may have to click the Acquire tab in the properties window. 6. Adjust the following settings: – Picture Mode — Set to Load Images from File. – File List — Click , and then Add... This displays the Open window.
Browse for the file, clipgood1.tif, from Windows. It is located at: C:\Vscape\Tutorials & Samples\Tutorials\GigE Systems\Using Measurement Tools in an Inspection\. Select Getting Started with Visionscape GigE Cameras 3-29