6. Once the Left Scan-Axis Offset has been calculated the Front Panel prompts you use the Up / Down keys to move the carriage until the RIGHT edge of the Left Alignment Mark on the Carriage Cover is perfectly aligned with the Primer positioning indicator. 7. Use the Up (move left) and Down (move right) keys to move the Carriage until the RIGHT edge of the Left Alignment Mark is correctly aligned with the Primer Positioning Indicator and press ENTER . Carriage Cover Left Alignment Mark Primer Positioning Indicator NOT ALIGNED Carriage Movement Up key Down key ALIGNED NOTE:
To more easily detect the exact position while aligning the Carriage to the Primer it is a good idea to lightly press down on the Primer while you are moving the Carriage. Service Calibrations 174 Chapter 5 Service Calibrations