Lines are too thick, too thin, or missing Print Quality 1. Check that the paper type you have loaded corresponds to the paper type selected in the front panel and in your software. To check on the front panel, use the View loaded paper key. 2. Check that you are using appropriate print-quality settings for your purposes. See Select print quality on User Guide. 3. If the resolution of your image is greater than the printing resolution, you may notice a loss of line quality. You can find the Max. Application Resolution option in the Windows driver dialog's Advanced tab, under Document Options > Printer Features.
If you change this option, you may wish to reprint your job at this point in case the problem has been solved. 4. If lines are too thin or missing, print the Image Diagnostics Print. 5. Try aligning the printheads. After alignment, you may wish to reprint your job in case the problem has been solved. 6. Select the icon from the printer's front panel, then View loaded paper to see the paper advance calibration status. If the status is PENDING, you should perform paper advance calibration if the paper does not use OMAS advance control. Lines appear stepped or jagged If lines in your image appear stepped or jagged when printed: 1. The problem may be inherent in the image.
Try to improve the image with the application you are using to edit it. 2. 2.Check that you are using appropriate print-quality settings. See Select print quality on User Guide 3. Change your image rendering resolution to 300 dpi or 600 dpi depending on your printing needs. You can find the Max. Application Resolution option in the Windows driver dialog's Advanced tab, under Document Options > Printer Features. 200 Chapter 6 Print Quality