Print Quality PEG wick Wiper Cap Spittoon Rib that interacts with a pin on the Carriage Assembly to cap the Printheads (a total of two, one on each side) Ink absorber Vacuum ports for aerosol extraction To cap the Printheads: • The Carriage Assembly is first positioned over the Service Station. • The Maintenance Cartridge moves towards the back of the printer which allows Pin #1 and Pin #2 on the Carriage Assembly to push against Rib #1 and Rib #2 to lift the caps into contact with the Printheads. Pin #1 Pin #2 Rib #1 Rib #1 212 Chapter 6 Print Quality