Rear Door (60-inch) Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Left Cover ⇒ See page 270 . 2. Remove seven T-15 screws ( Type G ) and the four T-15 screws ( Type X ) from the Rear Door. NOTE: Each Type X screw includes a washer (part number 3050-1267). Type Removal & Installation 3. Open the Rear Door slightly (as shown, approximately 30 degrees). 4. Lift the left side of the rear door sufficiently to release it from the location stud. Rear Door (60-inch) 283