Encoder Strip and Encoder Sensor Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Left Cover ⇒ See page 270. 3. Uncap the Carriage Assembly by manually pulling out the Printhead Maintenance Cartridges tray. Removal & Installation 4. Lift the Primer and hold the Primer to its maximum position to avoid damaging it when you move the Carriage Assembly in the next step. 5. Move the Carriage Assembly out of the Service Station. Encoder Strip and Encoder Sensor 331