21. Remove the right Scan-Axis Bracket from the Printer. 22. Remove the Carriage Stopper Screw (T-20) from the Chassis. Removal & Installation 23. Remove the Carriage Stopper from the Printer. 24. Slide the Carriage Assembly (including the belt) to the right and out of the Printer. 25. If the Carriage Assembly is to be replaced, make sure that you remove the Belt, the Carriage PCA, Color Sensor, Encoder and Line Sensors and the Cutter Assembly (in order to install them on the new Carriage Assembly). NOTE: After installing the NEW Carriage Assembly, make sure you perform the following Service Utility: Carriage Assembly 343