• Media Specific Calibrations (performed by the User). Troubleshooting General Calibrations • Printhead Alignment relates to the Printhead Alignment which changes to ‘pending’ when a Printhead is replaced and the Printhead Alignment has not been performed. NOTE: When a component is replaced, the corresponding calibration is NOT automatically set to ‘NOT DONE‘. This is because the Printer does not know that there is a new part installed. • Drop Detector relates to the Drop Detector or Service Station calibration. • Line Sensor relates to the Line Sensor Calibration. Media Specific Calibrations This section shows the following for each type of media: • Media Name. • Color. • Paper Advance.
How to Interpret the Service Information Pages 27