Main PCA Formatter Removal WARNING!: Switch off the printer and remove the power cable. CAUTION: Do NOT remove the Fan or the Processor (located under the Fan) from the Main PCA Formatter - The Fan and the Processor are part of the Main PCA Formatter support part and should be replaced as one assembly. 1. Remove the EIO to PCI Interface Card ⇒ See page 360 . 2. Remove the Sausalito PCI PCA ⇒ See page 369 . 3. Remove the Memory Module ⇒ See page 373. 4. Disconnect ALL cables connected to the Main PCA Formatter. Removal & Installation 5. Remove eight T-10 screws ( Type I ) that secure the Main PCA Formatter. Main PCA Formatter 375