HP — Electronics Module

Electronics Module Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Connector Cover ⇒ See page 285. 2. Remove the Left Connector Cover: • For the 42-inch model ⇒ See page 287. • For the 60-inch model ⇒ See page 288. 3. Disconnect ALL the cables connected to the right Interconnect PCA and the Sausalito PCI PCA. Removal & Installation 4. Unroute all the disconnected cables so they are clear of the Electronics Module. x 5. Remove two T-20 screws ( Type B ) that secure the right side Electronics Module. 388 Chapter 8 Removal & Installation