HP — Drive Roller

22. For the 60-inch model, rotate the Roller Middle Support Cover vertically. 23. For the 60-inch model, release the Roller Middle Support Cover from its attachment point. Removal & Installation 24. For the 60-inch model, remove the Roller Middle Support Cover. 25. Remove the Drive Roller by sliding it to the right, then downwards and then out of the Printer. NOTE: When reinstalling the parts, make sure you apply the grease (included with the support part) to the gears. 1 NOTE: After installing the NEW Drive Roller, make sure you perform the following Service Calibration. 2 • Paper Advance Calibration ⇒ Chapter 5. 436 Chapter 8 Removal & Installation