Take-Up Reel Left Hand Module Removal WARNING!: Switch off the printer and remove the power cable. 1. Close the Paper Bin (if open). 2. Remove one rear T-20 screws that attaches the Take-Up Reel Left Hand Module to the Left Leg Assembly. Removal & Installation 3. Loosen the two front T-20 screws that attach the Take- Up Reel Left Hand Module to the Left Leg Assembly. 4. Lift the Take-Up Reel Left Hand Module sufficiently so you can remove it from the Left Leg Assembly. 2 1 444 Chapter 8 Removal & Installation