HP — Lubricating the Carriage Assembly

Use a clean, absorbent, lint-free cloth that you have slightly dampened with isopropyl alcohol to very gently wipe any dust and loosened ink deposits from the sensor window. Applying Oil to the Overdrive Occasionally, it maybe necessary to oil the Overdrive in order to stop the rollers from squeaking: 1. Open the Window. 2. There are small holes in the Center Platen beside some of the rollers. 3. A bottle of oil is supplied with the Maintenance Kit. Insert the pointed end of the bottle into each hole in turn, and put three drops into each. 4. Be very careful not to spill any oil onto the Center Platen. 6. Close the Window. 5.

If there is oil on the Center Platen, wipe it away with the cloth supplied with the Maintenance Kit. Preventive Maintenance Lubricating the Carriage Assembly The Carriage Assembly needs to be lubricated occasionally (at least once a year) so that it can slide easily along the Slider Rod. 1. Using the Front Panel, in the Printheads menu, select “Replace printheads now”. The Carriage Assembly will move to the center of the Printer. 2. Open the Window and apply a few drops of oil (bottle of oil can be found in the Maintenance Kit) to the pads on either side of the Carriage Assembly. 3. Apply a few drops of oil directly to the Slider Rod on either side of the Carriage Assembly.

458 Chapter 9 Preventive Maintenance