Enabling gNMI in Insecure Mode This task is applicable in Cisco IOS XE Amsterdam 17.3.1 and later releases. Note In a Day Zero setup, first enable the device in insecure mode, then disable it, and enable the secure mode. To stop gNxI in insecure mode, use the no gnxi server command. gNxI insecure and secure servers can run simultaneously on a device. Note The gnxi commands apply to both gNMI and gRPC Network Operations Interface (gNOI) services. gNxI tools are a collection of tools for Network Management that use the gNMI and gNOI protocols. Note SUMMARY STEPS 1. enable 2. configure terminal 3. gnxi 4. gnxi server 5. gnxi port port-number 6. end 7.
show gnxi state DETAILED STEPS Procedure gNMI Protocol Enabling gNMI in Insecure Mode Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 gnxi Example: Device(config)# gnxi Starts the gNxI process. gNMI Protocol 16