Paper feed assembly 1 To remove the paper feed assembly: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). d Remove the left side cover (page 143). e Remove the front right side cover (page 144). f Remove tray 1 (page 146). g Remove the tray 1 pickup assembly (page 161). The paper feed assembly is on the front of the printer. Note wire routing 2 1 Figure 73. Unplugging the connector to the paper feed assembly 2 Unplug and unroute the two-pin connector (callout 1) from the right side. CAUTION For replacement of the paper feed assembly, note the way the wires are routed to the connector.
If a wire is routed improperly, it can be damaged. EN Chapter 6 Removing and replacing parts 167