Paper-feed guide assembly 1 To remove the paper-feed guide assembly: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). d Remove the left side cover (page 143). e Remove the front right side cover (page 144). f Remove the rear cover/rear output bin (page 145). g Remove the fuser assembly (page 149). h Remove tray 1 (page 146). i Remove the tray 1 pickup assembly (page 161). j Remove the right side toner cartridge guide (page 164). k Remove the registration assembly (page 165). l Remove the formatter assembly (page 151). m Remove the printer drive assembly (page 169).
n Separate the engine module from the paper-feed module (page 171). o Remove the engine controller board (page 173). 2 Remove the plastic main gear cable guide by releasing the three tabs. 3 Loosen the plastic formatter ribbon cable guide. 4 Disconnect the paper-sensor cable. 5 Remove the two self-tapping screws. 6 Carefully remove the paper-feed guide assembly. Note The engine controller board grounding spring might interfere with removal. 176 Removing and replacing parts EN