Hantek 6022BE 2.3 The Vertical System Click “ Vertical ” in main menu The following figure shows the vertical system menu. It shows the vertical parameters setting. 1. CH1 : Leads to the setting of the CH1 parameters 2. CH2 : Leads to the setting of the CH2 parameters Use the left mouse button to dragging the channel icon to set the vertical position offset precisely. 2.4 The Horizontal System Click “ Horizontal ” in main menu The following figure shows the Horizontal System window. It shows the horizontal parameters settings. 1. Time/DIV : leads the setting of the time base parameters 2. Format :
leads the setting of the horizontal format parameters The time base ranges of the oscilloscope is listed as follows. The horizontal scan speed is from 4ns/div to 1hour/div. In the “ Format ” menu of the “ Horizontal ” menu, select the display mode to Y-T, X-Y. User’s Manual 21