Hantek 6022BE 4.1 Simple Measurement To acquire and display a signal, please do the steps as follows: Connect signal to CH1 by using probe The oscilloscope set the vertical, horizontal, and triggers controls at the best status automatically. Also, you can adjust the controls to meet your measurement to optimize the waveform display. 1. To measure the frequency and “ Vpp ”, you can do these steps as follows: 2. Click the button, the frequency of the signal display on the bottom of the waveform interface. 3. Click the button, the “ Vpp ” of the signal will also display on the bottom of the waveform interface. 4. To clear the measurement on the waveform interface, click the button.
User’s Manual 47