Hongqi — H5 OM.book

3-3. Adjusting the seats Seat memory* It can store the information of seats, exterior mirrors and the key. ■ Self-study setting By operating the seat adjustment switch, adjust the seats to the utmost positions in 8 directions (front and rear, front height, seat height, backrest) and hold these positions for more than 1s, then the self-study of the system will be completed. If the self-study on a motor fails, the seat system will not support the memory function. ■ Seat memory setting Set the memory content:

After adjusting the positions of the seats and the exterior mirrors, press and hold any memory button until the instrument sounds prompt tone, indicating the position information and current key information has been stored in this button. Call up the memory content: press the memory button to make the seats and the exterior mirrors automatically move to the stored positions in this button. Each key corresponds to three sets of memory positions. 1 2 3 H50117O ■ When setting the memory ● The memory setting for the seats and the rear-view mirror positions should be performed while the vehicle is stationary and the engine switch is set to the “IG-ON” mode.

● Manually adjusting the positions of the seats and the rear-view mirrors during memory setting will automatically exit this function. 104 Seat memory setting