3-5. Opening and closing the windows 2 1 Manually up/down Pull/press the level 1 on the corresponding window switch (keep pulling/pressing), window will be regulated down manually. Automatically up/down the up/ Pull/press the level 2 on the corresponding window switch (release after pulling/ pressing), the window will H50135O The engine switch is in “ACC” or “IG-ON” mode. ■ Operating power windows after turning off the engine Within about 60 seconds after the engine switch is turned off, the power windows can still be closed. ■ Initialization When the automatic up/down function fails, the window needs to be initialised. The initialization method is as follows:
● With the door window at any position of the anti-pinch effective area (more than 4 mm from the window frame), keep pulling the switch on the window to be initialized until the window is fully closed and keep this pulling for more than 2 seconds, then the initialization process finishes. Please contact the FAW Authorised Hongqi Dealer if necessary. 114 move up/do Power window lock switch Press this swi power window occupants. The power w driver and fro are not reg switch. H50136O Operating condition for power windows