4-3. Operating lights and wipers •Few street lights are turned on ahead. ● When any one of the following conditions are met, the high beam will automatically turn off: •The vehicle speed is lower than 25 km/h. •The area in front of the vehicle is not dark. •There is a car ahead with its headlights completely on or tail lights completely on. •A number of street lights are turned on ahead. Under the following circumstances, the system may not be able to accurately detect the ambient brightness level, which may cause the intelligent high-beam control system not to work properly. In this case, please switch between high beam and dipped beam manually.
● The windshield is blurred by moisture, ice, dirt, etc. ■ ● The windshield is cracked or damaged. ● Due to fog, heavy rain, snow and other reasons, the horizon ahead is not clear. ● The camera becomes deformed or dirty. ● The ambient brightness is equivalent to the brightness of the headlight, tail light or fog light. ● The camera temperature is extremely high. ● Headlights or taillights of the front vehicle are off, dirty, decolored, incorrect in alignment, or there is only one bulb working. ● When driving through an area with intermittent changes in brightness. ● Frequent or repeated driving on uphill and downhill roads, bumpy roads or uneven roads (e.g.
stone paved roads, gravel roads, etc.). ● There is a highly reflective object, such as a sign or mirror, in front of the vehicle. ● Frequent or repeated turning operations or driving on winding roads. ● The back end of the vehicle ahead is highly reflective, such as a container on a truck. ● When the opposite car turns off its headlights and turns on the fog lights. ● The headlight of the vehicle is damaged, dirty, or misaligned. ● The vehicle tilts due to flat tires, towing a trailer, etc. ● The high beam and the low beam are repeatedly switched in an abnormal way. ● There is a light in front of the vehicle similar to a headlight or taillight. 150