4-5. Using other driving systems I NOTICES ■ ACC will maintain the preset distance to follow the target object. ACC will automatically stop the vehicle if the target vehicle decelerates or stops. ■ The vehicle will automatically start under the control of ACC if the target vehicle restarts or leaves the lane within 3s after stopping. ■ If the target vehicle restarts or leaves the lane after 3s yet within 3 min after stopping, the instrument cluster MFD will remind the driver to resume cruise. The driver can gently depress the accelerator pedal or pull cruise control lever to RES+ to resume ACC function, so as to achieve the vehicle automatic starting.
■ ACC will automatically be cancelled if the vehicle stops for over 3 min. ■ The ACC cannot stop your vehicle for a long time. Do not leave your vehicle while the ACC keeps the vehicle stopped. Be sure to shift the selector lever in the P position before leaving your vehicle. 4 ■ Observe the following precautions when cornering with the ACC activated: ● In a sharp corner, the ACC may be cancelled or limit the vehicle speed. Driving ● On a curve, the ACC may respond to the vehicle in another lane or may not have time to respond to the vehicle in the same lane. Your vehicle may collide with the vehicle ahead or may be uncontrolled.
Especially when driving in a ramp, the vehicle may be accelerated since the sensor loses its target due to an excessive curve. Exercise extreme caution on a curve and get ready to apply the brakes if necessary. When driving on a curve, choose the right vehicle speed. ■ When your vehicle follows the preceding vehicle to pass through the intersection with traffic lights, observe the change of the traffic lights and intervene actively if necessary to avoid violating the traffic rules.
■ When driving in heavy fog, rain, snow or other weather conditions, or there is frost and/or dirty trace in the multi-function camera window area, or when your vehicle is moving in the direction toward the sun (or strong light source), the "ACC Has Been Cancelled due to Unsatisfied External Conditions" prompt may appear on the combination instrument due to limited visual field of the multifunctional camera. As a result, the ACC cannot work. 171