4-5. Using other driving systems ■ Cancel and resume LIM SEEK+ Cancel Turn the control lever clockwise and then release it to cancel the LIM. Resume Turn the control lever upwards to resume the LIM. If the current vehicle speed is higher than the previous setg value, the LIM cannot be resumed. 2 2 VCL VCL SEEK- SEEK- DIS- RES/ LIM ON/OFF CANCEL DIS+ SET/ 1 1 H52203O H51031O ■ Fine adjusting the set speed Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it immediately (increasing or decreasing the speed by 5 km/h). ■ Setting conditions for LIM system ● Vehicle speed is more than 30 km/h. ● Vehicle speed is less than 130 km/h.
NOTICES ■ If the accelerator pedal is pressed all the way down to the end, the vehicle will no longer be constrained by the LIM but accelerate normally. If the vehicle is decelerated to the set speed, the LIM is automatically resumed. The LIM system won’t be cancelled during operation. ■ Under special conditions (e.g., going downhill), if the vehicle speed exceeds the set value, the LIM is kept. ■ The LIM and the ACC or CCS cannot be activated simultaneously. The other function is allowed to be activated only if the current function is deactivated. ■ If there is a trouble in the LIM, the MIL will not be lit.
If failure to activate any function is detected, contact your FAW Authorised Hongqi Dealer . ■ You are the most important controller of your vehicle. The LIM system is only a driving assistance system. You should control your vehicle based on the actual road conditions and drive it with caution. 174