4-5. Using other driving systems ■ Adjusting or calibrating AEB system Adjust or calibrate the AEB in the following situations. Otherwise AEB may not function properly. • • • Front windscreen is damaged or replaced. Replace the multifunctional camera unit. After adjusting wheel alignment. If calibration is needed, contact the FAW Authorised Hongqi Dealer. CAUTIONS ■ For the sake of safety, the occupants must wear seat belts properly. ■ AEB is only one of the driving assist systems. Do not depend on AEB more than necessary. Driver shall drive with caution. ■ The AEB may not recognize the modified or decorated vehicles with special appearance.
■ Curved, hilly or unusual bumpy roads may cause the FCW not to detect the preceding vehicle. Exercise greater caution to drive. ■ AEB may not be able to identify riders and other targets. ■ When the electronic stability control (ESC) is turned off or failed, the braking function of the AEB will not be activated. ■ The AEB may not work properly if there is heavy snow or rain ■ The AEB may not work properly in the scenes with strong backward lighting, road reflection and insufficient ambient lighting. Exercise greater caution to drive. ■ If your vehicle is needed to tow a disabled vehicle or a trailer, deactivate the AEB.
When the brakes are controlled under towing conditions, the safety of the vehicle deteriorates. ■ The high chassis of the preceding vehicles or the cargo protruding from the rear of the preceding vehicle may increase the risk of danger. ■ Make sure the front windshield is not modified or covered by any auxiliary equipment. The modified or covered windshield may cause the AEB to deteriorate or fail. ■ If the camera is displaced due to a collision, the AEB function may be degraded or failed. Have the AEB calibrated in time. ■ Do not use the improperly-calibrated AEB.
■ The AEB obtains the vehicle information by recognizing the rear of the vehicle, so no warning is given to the oncoming vehicle and the horizontally crossing vehicle in front. 202