4-5. Using other driving systems NOTICES ■ Be sure to prevent the rear bumper from being clashed when parking. Otherwise, the sensor in the bumper may be displaced or damaged, and thus cause the SWA to be automatically shut down or the SWA function to be affected. ■ To ensure normal operation of the SWA, the sensor in the bumper should be clean, and not be covered by other objects. ■ Coat the rear bumper only with the paint approved by FAW. Failure to do so may result in limited functionality of the SWA or a trouble in the SWA. ■ If it is not working properly, deactivate the SWA immediately and contact your FAW Authorised Hongqi Dealer for repair. ■ The repaired SWA needs to be calibrated.
For the details, contact your FAW Authorised Hongqi Dealer. ■ The SWA will not respond to the pedestrians, animals, bicycles and others in blind spots. 4 ■ The SWA only serves as an auxiliary reminder. It cannot completely avoid collisions in the blind spots. Before changing the lane, be sure to observe the rearview mirrors, scan backwards and turn on the turn signals. Driving ■ Special operating conditions, such as dark and damp weather and high speeds, may cause the SWA to give false alarm or to miss alarm. This is a normal phenomenon. ■ When the SWA sensor behind the vehicle is blocked, the SWA will not work. Clear the sensor in time.
■ The SWA is limited by the physical laws and system conditions and may not be able to correctly identify traffic conditions under some driving conditions. Such as the following conditions: ● In a lane with sharp turn. ● In a lane with different width. ● On a mountain road with ups and downs. ● In bad weather. ● At some special structures on the roadside, such as high or offset highway guardrails. 207