8-2. Measures to be taken in emergencies STEP Calibrate the jack positions to make its notch “1” cover the jack point and the base plate “2” flatly attached to ground. At this moment, the base plate “2” must be vertically under the jack point. H52054O STEP Insert the jack handle into the hole of the jack. Rotate the jack handle to raise the vehicle and allow the wheels slightly off the ground. STEP H52055O Remove all the wheel nuts and the tyre. When resting the tyre on the ground, place the tyre with the wheel spoke facing upward to avoid scratching the wheel surface. H52056O 374