Connecting the Cables and Grounding the Printer You can connect up to five cables to the printer. They all connect to the connector panel on the bottom of the printer, which is shown below: Grounding screw Power supply Drawer kick-out Display module Interface Note: There are caution labels beside the drawer kick-out connector and the display module connector. Depending on the interface installed, the interface connector on your printer may look different from the one illustrated. Before connecting any of the cables, make sure that both the printer and the computer are turned off. Connecting the computer You need an appropriate interface cable. 1.
Plug the cable connector securely into the printer’s interface connector. Setting Up the Printer 1-3