J Since the TOF sensor uses a reflective photo sensor and it detects from the back of slip paper, do not use paper that has holes or dark portions with low reflection (less than 40% reflection) at the sensor position. J Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper. If thick paper is used, the copy capability is lowered. Reference Information 4-9 31 Form stopper position 8 1.3 18.9 TOF sensor 38.5 position 18 Center of the print head Slip feeding roller position Slip side guide Paper feed direction BOF sensor 31 MICR head 1.8 39 37.2 21.9 3.6 [ All the numeric values are typical. ] 8 18.
1 1.3 9 TOF sensor position 8 Center of the print head 1.8 39 37.2 21.9 15 24 10 Area where paper holes are prohibited and reflection rate for the back of paper should be 40% or more. Paper holes and translucence prohibited area. Paper feed direction [Units: mm (All the numeric values are typical.)] 24 10