[Description] Selects the type of paper for printing, using n as follows: ESC c 1 n [Name] Select paper type(s) for command settings [Format] ASCII ESC c 1 n Hex 1B 63 31 n Decimal 27 99 49 n [Range] 1 ≤ n ≤ 4 [Description] Selects paper type(s) for use with various command settings. ESC c 3 n [Name] Select paper sensor(s) to output paper end signals [Format] ASCII ESC c 3 n Hex 1B 63 33 n Decimal 27 99 51 n [Range] 0 ≤ n ≤ 255 [Description] Selects the paper sensor(s) to output paper end signals • This command is available only with a parallel interface and is ignored with a serial interface. 5-14 Commands Bit Off/On Hex Decimal Function 0 Off 00 0 Paper roll disabled.
On 01 1 Paper roll enabled. 1 Off 00 0 Paper roll disabled. On 02 2 Paper roll enabled. 2 Off 00 0 Slip paper disabled. On 04 4 Slip paper enabled. 3-7 - - - Undefined. Bit Off/On Hex Decimal Function 0 Off 00 0 Paper roll disabled. On 01 1 Paper roll enabled. 1 Off 00 0 Paper roll disabled. On 02 2 Paper roll enabled. 2 Off 00 0 Slip paper disabled. On 04 4 Slip paper enabled. 3-7 - - - Undefined.