Chapter 4: BIOS System Health Monitor CPU Overheat Temperature Use the "+" and "-" keys to set the CPU temperature threshold to between 65 o and 90 o C. When this threshold is exceeded, the overheat LED on the chas- sis will light up and an alarm will sound. The LED and alarm will turn off once the CPU temperature has dropped to 5 degrees below the threshold set. The default setting is 78 o C . Other items in the submenu are all systems monitor displays for the following information:
CPU1 Temperature, CPU2 Temperature (for 2U systems), System Temperature, CPU1 Vcore, CPU2 Vcore (for 2U systems), CPU1 DIMM voltage, CPU2 DIMM voltage, 1.5V, 2.5V, 3.3V Vcc (V), 3.3VSB, +5Vin, 5VSB, +12Vin, -12Vcc (V), 1.2V for Hyper Transport and battery voltage. System Fan Monitor Fan Speed Control Modules This feature allows the user to determine how the system will control the speed of the onboard fans. Select "Workstation" if your system is used as a Workstation. Select "Server" if your system is used as a Server. Select "Disable" to disable the fan speed control function to allow the onboard fans to continuously run at full speed (12V).
The options are 1) Disable, Full Speed 2) Server Mode, 3) Workstation Mode, 4) Quiet Mode and 5) Super Quiet Mode. FAN1 Speed through FAN8 Speed The speeds of the onboard fans (in rpm) are displayed here. FAN7 is intended to be used for the CPU1 heatsink fan and FAN8 is intended to be used for the CPU2 heatsink fan. 4-15