Supermicro H8DMT/H8DMT-F — Table 1-3. LEDs

Chapter 1: Introduction 1-3 Quick Reference Table 1-1. Jumpers Table 1-2. Connectors Table 1-3.

LEDs 1-5 Jumper Description Default Setting JBT1 CMOS Clear (see Section 2-7) JBMC1 BMC and Video Enable Header Pins 1-2 (Enabled) JI2C1/JI2C2 I2C to PCI-E Slot Both Closed (Enabled) JIB1 InfiniBand Enable/Disable (H8DMT/H8DMT-IBX only) Pins 1-2 (Enabled) JPL LAN Controller Pins 1-2 (Enabled) JWD Watch Dog Pins 1-2 (Reset) Connector Description COM1/COM2 COM1 Serial Port/Header FAN 1-4 Chassis/CPU Fan Headers J2 Auxiliary Power Connector (for IDE drives) JF1 Front Panel Connector JL1 Chassis Intrusion Header JOH1 Overheat Warning Header JWOL Wake-On-LAN Header JWR1 20-Pin Proprietary Power Connector JWR2 20-Pin Proprietary Power Connector LAN 1/2 Gigabit Ethernet (RJ45) Ports Dedicated LAN Gigabit Ethernet (RJ45) Port (H8DMT-F/H8DMT-IBXFonly) PWRI2C Power I2C Header SATA0 ~ SATA3 SATA Ports SMBus System Management Bus Header (H8DMT-F/H8DMT-IBXF only) T-SGPIO-1 Serial General Purpose Input/Output Header USB0/1, USB2/3/4/5 Universal Serial Bus (USB) Ports, Headers LED Description DP4 Onboard Power LED LE2 InfiniBand Physical Link LED (Red) LE3 InfiniBand Logical Link LED (Yellow)