Supermicro H8DMT/H8DMT-F — SMBus Header

H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual Overheat LED Connect an LED to the JOH1 header to provide warning of chassis overheating. See the table below for pin definitions. Chassis Intrusion A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion. See the table below for pin definitions. Wake-On-LAN The Wake-On-LAN header is designated JWOL. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake-On-LAN feature. See the table below for pin definitions. SMBus Header The header at SMBus is for the System Management Bus for the H8DMT-F/ H8DMT-IBXF Serverboards.

Connect the appropriate cable here to utilize SMB on the system. See the table below for pin definitions. 2-12 Pin# Definition 1 3.3V 2 OH Active Pin# Definition 1 Intrusion signal 2 Battery voltage Pin# Definition 1 +5V Standby 2 Ground 3 Wake-up Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection