H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual InfiniBand Port Enable/Disable JIB1 enables or disables the InfiniBand port on the H8DMT/H8DMT-IBX Serverboards. The default position is on pins 1 and 2 to enable the port. See the table below for jumper settings. 2-8 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table below for the functions associated with the connection speed LED. Power LED DP4 is an Onboard Power LED. When this LED is lit, it means power is present on the serverboard.
Be sure to turn off the system and unplug the power cord(s) before removing or installing components. See the table below for Power LED state status information. InfiniBand LED Indicators Two InfiniBand LED indicators (LE2/LE3) are located near the InfiniBand port of the H8DMT/H8DMT-IBX Serverboards. The green LED (LE2) is the InfiniBand link LED while the yellow LED (LE3) indicates activity. Refer to the tables below for details. 2-16 Jumper Setting Definition Pins 1-2 Enabled Pins 2-3 Disabled LED Color Definition Off 10 MHz Green 100 MHz Amber 1 GHz State State Status On Standby power present on motherboard Off No power connected