2 Outputs System Components About the Connections in the Following Subsections The following subsections detail how to connect the most common third-party devices to the HAWK MV-4000 output signals. Ground is only shown in the following subsections for reference, in case you need to reference your return path to ground. Power, as depicted in the following diagrams, represents a nominal voltage of up to 24V (+/- 10%). For minimum and maximum voltage requirements, refer to the electrical specification of the optoisolated output signals, in Appendix C: General Specifications.
Connecting an Output Signal to a Sourcing Input Connect a HAWK MV-4000 output signal to a sourcing input, as shown below. (Equivalent circuit only.) Note: When connecting a resistive load sourcing device instead of an input sensing sourcing device, the same connection would be used as displayed above. HAWK MV-4000 Smart Camera Guide 2-23