omron — Adding a HAWK MV-4000 to a Network

Chapter 2 System Components Adding a HAWK MV-4000 to a Network Corporate-wide networks typically use DHCP servers to assign each connected device an IP address. If your HAWK MV-4000 is still in its factory-configured state, and your network uses a DHCP server, no configuration is required to use your HAWK MV-4000 on your network. Default Device Name By default, HAWK MV-4000 comes factory configured with a unique device name. The device is preprogrammed with a Class C static IP address: 192.168.0.100. This name is used when connecting to a network and is of the form: HAWK329999 The last four hexadecimal digits of your HAWK MV-4000’s MAC address are used as the numeric part of the device name.

Both the network name of your HAWK MV-4000 and its MAC address are written on a sticker on your HAWK MV-4000. Note that, when dealing with the Windows version, the device name is also known as the computer name. 2-44 HAWK MV-4000 Smart Camera Guide